Essor International Inc.

About ESSOR

Products

Oem Sourcing & Service

Technology & Quality

Contact Us

Homepage

Product >>Multi-Spindle Head

MULTI-SPINDLE HEAD

Multi-Spindle Head (Fixed Machine Center Series)

Multi-Spindle Head >> (Medium Cutting) Type U Round shaft Multi-Spindle Tool

The basic frame consists of gear case and cardan joint. The hole-distance is easy to control and will not be affected by the gears. The set up time is thus saved and it is mostly free of dead angles. It is very suitable for working of round holes and is the easier to operate among the adjustable type. To ensure the lifetime of the cardan joint, the moving rang should be confined within 15 degrees, which means within a distance of 30mm to the vertical status.
When designing the structure of the gear case or the position of the bore, try to build the coordinate per working hole.

Type	SU110	SU165	SU200	SU250	SU300
Collet/Max. Drilling Capacity	ER8/5 C5/5 ER11/7 C6/6 ER16/10 C9/9 ER20/13 C12/12	ER8/5 C5/5 ER11/7 C6/6 ER16/10 C9/9 ER20/13 C12/12	ER8/5 C5/5 ER11/7 C6/6 ER16/10 C9/9 ER20/13 C12/12	ER8/5 C5/5 ER11/7 C6/6 ER16/10 C9/9 ER20/13 C12/12	ER8/5 C5/5 ER11/7 C6/6 ER16/10 C9/9 ER20/13 C12/12
R.P.M	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2
Lowest Distance	13 18 26 28	13 18 26 28	13 18 26 28	13 18 26 28	13 18 26 28
Max. Range of Centers	110	165	200	250	300
Spindle	2-6	2-10	4-12	4-12	4-14

Tel:+886-4-2359744018 Fax:+886-4-23597446 E-mail: sales@essor.com.tw